OPTIFLUX 5300
Electromagnetic flowmeter for advanced process and master meter applications
- Highest accuracy (±0.15%), with ceramic tube for aggressive and abrasive liquids (≤70% solid content) up to +180°C / +356°F
- CT: OIML R117, MI-005 etc.
- Flange: DN15…300 / ½…12", max. PN40 / ASME Cl 300; Sandwich: DN2.5...100 / ⅒...4"
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
Overview
The OPTIFLUX 5300 is an electromagnetic flowmeter (EMF) with a high-tech ceramic measuring tube for very aggressive and abrasive fluids, even with high solid content (up to 70%). The high-end EMF is particularly suited for process applications in the chemical processing industry and the minerals and mining sector. Due to its FDA and EC1935/2004 compliant sensor material, the OPTIFLUX 5300 can also be used for hygienic applications. With a measuring error of just ±0.15% of measured value (±1 mm/s) it is one of the most accurate electromagnetic flowmeters available in the market. That is why leading metrological institutes use the OPTIFLUX 5300 as their master meter.
Features & Options
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Bi-directional flow measurement over a wide dynamic range (turn down ratio: 1000:1)
- One of the most accurate EMFs in the market: Only ±0.15% / ±1 mm/s error of measured value (MV)
- Transfer standard of international metrological authorities
- Available with virtual reference grounding method: no grounding rings needed
- Withstands highly aggressive and abrasive fluids
- Extensive flowmeter and process diagnostics (incl. NE 107)
- Fully vacuum-resistant with high-tech ceramic sensor material
- Fused in-place cermet or platinum electrodes
- First EMF with ceramic measuring tube to comply with the Pressure Equipment Directive
- Resistance to corrosion and temperature shocks
- Available as flange or sandwich (wafer) version
- No moving parts, no wear, no pressure loss
- On-site verification of flowmeter with OPTICHECK service tool