Ceramic durability
By using oxide ceramics, KROHNE employs a technically superior material for electromagnetic flowmeters (EMF) and pressure-measuring devices. This material offers long-term resistance to corrosive and abrasive media and does not leach. Additionally, these ceramics are resistant to temperature shocks and completely safe against gas permeation and leakage – providing a unique combination of properties for high-performance applications across all industrial sectors.
Suitable for pressure applications of up to 100 bar and 150 °C
Overload-proof up to 200 times the nominal measurement range
100 % hydrogen resistance
100 % diaphragm breakage detection
In the event of diaphragm breakage this is detected by the sensor electronics
Ten times harder than stainless steel
Absolutely vacuum-tight
Related products
Electromagnetic flowmeter for demanding volumetric filling applications for a wide range of container sizes
- High accuracy measurement in process batching as well as cold or hot filling of conductive liquids, e.g. milk, fruit drinks with solid content, detergents etc.
- With ceramic measuring tube and sintered electrodes for applications up to 16 bar / 232 psi
- Flow tube conforms to EC1935/2004, FDA, GB 4806; 3A certified up to DN25 / 1"
- Frequency output integrated, CANopen®
Electronic differential pressure transmitter for level, differential pressure and density measurements
- Integrated electronic differential pressure measurement
- Alternative to diaphragm seal installations with long capillary lines
- Integrated static pressure measurement for additional process information
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA, Bluetooth®
Electromagnetic flowmeter for the volumetric filling of common container sizes
- The most compact filling mag meter in the market for filling of conductive liquids, e.g. water, carbonized soft drinks etc.
- Lightweight, economical design with ceramic flow tube for applications up to 8 bar / 116 psi
- The DN15 / ½″ ceramic tube conforms to EC1935/2004, FDA, GB 4806
- Frequency output integrated
Pressure transmitter with ceramic diaphragm for basic pressure and level applications
- Ultra-compact design with outstanding overload resistance, long-term stability and corrosion resistance
- Capacitive measuring cell without fill fluid: recessed or front-flush ceramic diaphragm
- Measuring range: 0.1...40 bar / 1.45...580 psi and max. +125°C / +257°F
- Thread: G¼, G½, G¾ (male), also available in metal-free PVDF or PP-HT