WATERFLUX 3100
Electromagnetic flowmeter for standard water applications
- From raw water measurement to drinking water metering in distribution networks
- No inlet/outlet runs needed
- Up to DN600 / 24", max. PN16 / ASME Cl 150
- 4…20 mA, pulse, frequency, status, HART®
Overview
The WATERFLUX 3100 is an electromagnetic flowmeter (EMF) for all standard applications with raw, potable or abstraction water. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX 3100 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.
Features & Options
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Bi-directional flow measurement over a wide dynamic range
- No need for measurement chambers
- Unique rectangular sensor design for good low flow performance
- Low pressure drop and minimal pressure impact on the network
- Fully welded sensor design for uncompromising leak safety
- Rilsan® coated sensor tube
- Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
- Maintenance-free: no moving parts, obstruction or wear
- Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- Compact or field mounted version
- On-site verification of flowmeter with OPTICHECK service tool