Conductivity sensors and measuring systems

For conductive or inductive conductivity measurement

Sensors with or without integrated transmitter (4…20 mA / HART®)
Also available as compact systems with integrated electronics or as pre-wired panel module for simultaneous measurement of conductivity and other parameters
For a broad variety of applications – from ultrapure water to potable water to CIP agents

Water analysis panel

Multi-parameter measuring system for water quality monitoring

Flexibility in selecting different water parameters: dissolved oxygen, turbidity, conductivity, pH/ORP
Installation on compact analytical modules: All measuring points at one location
Completely pre-wired and pre-assembled for easy bypass installation

View product details

SMARTPAT COND 1200

Conductive conductivity sensor for water and wastewater applications

2-wire loop powered, 4…20 mA/HART^® 7, for direct connection to a PCS
Process connection: G¾ (male)
0.1…20 mS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
With stainless steel electrodes and Pt1000 for temperature compensation

View product details

SMARTPAT COND 3200

Conductive conductivity sensor for condensate, process, boiler feed or (ultra)pure water

2-wire loop powered, 4…20 mA/HART^® 7, for direct connection to a PCS
Process connection: G¾ (male), ¾ NPT (male)
0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
With stainless steel electrodes and Pt1000 for temperature compensation

View product details

SMARTPAT COND 5200

Conductive conductivity sensor for chemicals and industrial wastewater applications

2-wire loop powered, 4…20 mA/HART^® 7, for direct connection to a PCS
Process connection: G¾ (male), ¾ NPT (male)
10 μS…15 mS/cm; Max. +130°C / +266°F; 16 bar / 232 psi
With graphite electrodes and Pt1000 for temperature compensation

View product details

SMARTPAT COND 7200

Conductive conductivity sensor for food, beverage and pharmaceutical applications

2-wire loop powered, 4…20 mA/HART^®7, for direct connection to a PCS
Process connection: VARIVENT^® N, Tri-Clamp 1½", 2"
0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
With stainless steel electrodes (Ra <0.8 μm) and Pt1000 for temperature compensation

View product details

OPTISENS COND 1200

Conductive conductivity sensor for water, pure water and wastewater applications

For use with analytical transmitter
Process connection: G¾ (male) for insertion installation
0.1 μS/cm…20 mS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
With two stainless steel electrodes (1.4571 / 316Ti), PVDF sensor body and Pt100 for temperature compensation

View product details

OPTISENS COND 1210

Conductive conductivity sensor for water and treated wastewater applications

For use with analytical transmitter
Process connection: G½ (male, sensor rear end) for immersion installation
1 μS/cm…20 mS/cm; Max. +90°C / +194°F; 16 bar / 232 psi
With two stainless steel electrodes (1.4571 / 316Ti), PP sensor body and Pt100 for temperature compensation

View product details

OPTISENS COND 3200

Conductive conductivity sensor for condensate, process, boiler feed or (ultra)pure water

For use with analytical transmitter
Process connection: G½, G¾, G1 (male) and ¾ NPT (male) for insertion installation
0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
With stainless steel (1.4571/316Ti) or titanium electrodes, PVDF or stainless steel (1.4571/316Ti) sensor body and Pt100 for temperature compensation

View product details

OPTISENS COND 3220

Conductive conductivity sensor for pure and process water with high temperatures and pressures

For use with analytical transmitter
Process connection: ¾ NPT (male) for insertion installation
1…1000 μS/cm; Max. +200°C / +392°F; 40 bar / 580 psi
With stainless steel electrodes and sensor body (1.4404/316L), Pt100 for temperature compensation

View product details

OPTISENS COND 5200

Conductive conductivity sensor for industrial water, wastewater and chemical applications

For use with analytical transmitter
Process connection: G¾, G1 (male), ¾ NPT (male) for insertion installation
0.01…15 mS/cm; Max. +130°C / +266°F; 16 bar / 232 psi
With graphite electrodes and Pt100 for temperature compensation

View product details

OPTISENS COND 7200

Conductive conductivity sensor for food, beverage and pharmaceutical applications

For use with analytical transmitter
Process connection: Clamp DN25-40, 1½″
0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
Short installation length of only 60 mm / 2.36", with standard stainless steel electrodes (∅22 mm / 0.87"), P100 temperature sensor and 4-pin right angle connector

View product details

OPTISENS COND 7230

Conductive conductivity sensor for food, beverage and pharmaceutical applications

For use with analytical transmitter
Process connection: Clamp DN25-40, 1½″
0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
Extra slim design with ∅16 mm / 0.63″ stainless steel electrodes, 115 mm / 4.53″ installation length, temperature sensor and M12 connector

View product details

Showing 12 of 14