Primary flow elements
For flow measurement in combination with a DP flow transmitter
Various designs of orifice plates, averaging pitot tubes and cone meters
Standard portfolio for the most common DP flowmeter designs
Testing acc. to ASME and PED, optional wet calibration with documentation
Orifice plate with RF sealing face
- For mounting between measuring flanges (ASME 16.36, 16.5, 16.47 A)
- Size: ½…24"; up to ASME Cl 2500
- Temperature: up to +450°C / +842°F
- Material: 1.4404 / 316L
Orifice plate with RTJ sealing face
- For mounting between measuring flanges (ASME 16.36, 16.5)
- Size: 1…24"; up to ASME Cl 2500
- Temperature: up to +450°C / +842°F
- Material: 1.4404 / 316L
Orifice plate with flat sealing face and corner taps
- Separate type, with carrier ring and optional shut-off valve
- Size: DN50…600; up to PN100
- Temperature: up to +400°C / +752°F
- Material: 1.4404 / 316L
Orifice plate with flat sealing face and corner taps
- Compact type, with carrier ring, flange plate and optional manifold
- Size: DN50…600; up to PN100
- Temperature: up to +400°C / +752°F
- Material: 1.4404 / 316L
Orifice plate with annular chamber and corner taps
- Separate type, for installation between standard flanges (EN 1092-1), optional shut-off valves
- Size: DN50…600; up to PN100
- Temperature: up to +400°C / +752°F
- Material: 1.4404 / 316L
Orifice assembly with measuring flanges (ASME 16.36)
- With RF sealing face and flange taps
- Size: 1…24"; up to ASME Cl 2500
- Temperature: up to +400°C / +752°F
- Material: 1.4404 / 316L
Orifice assembly with measuring flanges (ASME 16.36)
- With RTJ sealing face and flange taps
- Size: 1…24"; up to ASME Cl 2500
- Temperature: up to +400°C / +752°F
- Material: 1.4404 / 316L
Orifice meter run with corner taps and annular chambers
- Completely pre-assembled with orifice plate, piping, inlet/outlet sections, process connections
- Size: DN15…100 / ½…4"; up to PN100 / ASME Cl 1500
- Temperature: max. +400°C / +752°F
- Material: 1.4404 / 316L
Averaging pitot tube with multiple impact-sensing ports
- Low pressure loss design; from basic to engineered solutions
- Cryogenic to high temperatures possible (-200…+1000°C / -328…+1832°F); max. 160 bar / 2320.1 psi
- For line sizes from DN50…2000 / 2…80" (larger on request)
- Material: 1.4404 / 316L
Engineered primary element for DP flow measurement of high velocity, non-viscous or erosive fluids
- ISA 1932, long radius and Venturi nozzles
- Standards: ISO 5167, ASME MFC-3M or ASME PTC 6
- Only short inlet and outlet runs required
Engineered primary element for DP flow measurement of liquids, gases and steam with the lowest residual pressure loss
- Machined or welded design (internally machined) according to EN ISO 5167, ASME MFC3
- Lowest residual pressure loss of all DP elements
- Only short inlet/outlet runs required
- From basic to special wet gas applications and high pressure conditions
Engineered primary element for DP flow measurement in applications with limited installation space
- Meter run with integrated cone and single taps according to EN ISO 5167-4
- Rugged solution for difficult media and harsh operating conditions, e.g. in oil and gas applications
- Designed for large diameters (up to 24″), demanding flow profiles, high pressures and temperatures
Showing 12 of 13