Pressure level transmitters
Contact level measurement of liquids and liquid-liquid interfaces
From entry level ultra-compact to advanced hydrostatic process pressure transmitters
For a broad range of applications, with metallic and ceramic sensors
Full compliance with hygienic, marine, hazardous area and safety related (SIL) applications
with diaphragm seal
Differential pressure transmitter for advanced applications and high temperatures
- Continuous measurement of differential pressure, level, density and interface
- Different diaphragm seals for corrosive, viscous or reducing media and vibration
- Thread: ¼ NPT; Flange: DN50…100 / 2…4"
- Measuring range: max. 16 barg / 232 psig; max. +400°C / +752°F
Pressure transmitter for basic pressure and level applications
- Ultra-compact design with recessed stainless steel diaphragm
- Up to 600 bar / 8700 psi
- Thread: ¼, ½ NPT (male); G¼, G½ (male)
- 2-wire 4…20 mA
Pressure transmitter with ceramic diaphragm for basic pressure and level applications
- Ultra-compact design with outstanding overload resistance, long-term stability and corrosion resistance
- Capacitive measuring cell without fill fluid: recessed or front-flush ceramic diaphragm
- Measuring range: 0.1...40 bar / 1.45...580 psi and max. +125°C / +257°F
- Thread: G¼, G½, G¾ (male), also available in metal-free PVDF or PP-HT
Pressure switch for basic pressure and level applications
- Integrated display with switch state indication and 2-button setup
- 0.1...600 bar / 1.5...8700 psi; max. +125°C / +257°F
- With recessed stainless steel diaphragm
- Fully configurable: IO-Link and PNP/NPN as standard I/O, 4…20 mA, 0...10 V or NPN/PNP as secondary output
Pressure transmitter for hygienic pressure and level applications
- Ultra-compact design with flush diaphragm: with 3A certification
- 0.1…40 bar / 4…580 psi; max. +150°C / +302°F (for SIP/CIP)
- Many hygienic connections available
- 2-wire 4…20 mA
Pressure switch for hygienic level and pressure applications
- Integrated display with switch state indication and 2-button setup
- 0.1…40 bar / 4…580 psi; max. +150°C / +302°F (for SIP/CIP)
- With many flush-mounted hygienic process connections, also 3A certified
- Fully configurable: IO-Link and PNP/NPN as standard I/O, 4…20 mA, 0...10 V or NPN/PNP as secondary output
Pressure transmitter for general pressure and level applications
- Compact design with recessed or flush metallic diaphragm and optional display module
- 0.1…100 bar / 1.45…1450 psi
- Thread: G½, ½ NPT (male, female)
- 2-wire 4…20 mA/HART®
Pressure transmitter for advanced process pressure and level applications
- Robust design, with corrosion and abrasion resistant ceramic diaphragm
- 25 mbar…100 bar / 0.73…1450 psi; max. +150°C / +302°F
- Various threads, flanges, hygienic and other connections
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA, Bluetooth®
Pressure transmitter for process pressure and level applications
- Rugged design with fully welded metallic diaphragm suited to high pressure ranges and hygienic requirements
- 100 mbar…1000 bar / 1.45…14500 psi
- Various threads, flanges, aseptic and other connections
- 2-wire 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®
Submersible level probe for water and wastewater applications
- For continuous hydrostatic level measurement in basins and wells
- With corrosion-resistant ceramic measuring cell
- Level (water): 1…100 m / 3.3…328 ft; Pressure: 0.1…10 bar / 1.45…145 psi
- 2-wire, 1 x 4…20 mA, HART®
Electronic differential pressure transmitter for level, differential pressure and density measurements
- Integrated electronic differential pressure measurement
- Alternative to diaphragm seal installations with long capillary lines
- Integrated static pressure measurement for additional process information
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA, Bluetooth®