Industriuka 2026

For all process and custody transfer (CT) applications

• Mass, volume flow and temperature measurement of liquids and gases, density and concentration measurement of liquids

• Secure wireless access via Bluetooth®, even in safety-related applications

• With Entrained Gas Management  (EGMTM): Maintains operation over a wide range of gas volume fractions, even up to 100%, and complex flow conditions

For process and utility applications, energy and custody transfer (CT) measurements

• Comprehensive portfolio for gases, liquids and steam

• High temperature and cryogenic versions, variants for high pressure and higher viscosities

• Various designs: From clamp-on devices to multipath inline flowmeters

Electromagnetic flowmeter for safety instrumented systems (SIS) and high-accuracy requirements

• Certified for safety applications up to SIL 2/3, with automated partial proof test capability for extended proof test intervals

• Best-in-class diagnostic test interval incl. fault response time of only 2 minutes

• SIL 2/3 up to DN600 / 24"; non-SIL up to DN2000 / 80" (larger on request)

• Pulse, frequency, status, 4…20 mA, HART®7

Coriolis mass flowmeter for advanced process applications

• High accuracy (±0.05% flat), for cryogenic to HT media (-200…+400°C / -328…+752°F); maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)

• SIL 2/3; CT: OIML R117, R137, MI-005, MI-002; API, AGA; hygienic certifications

• Flange: DN10…300 / ½…12", max. PN 160 / ASME Cl 1500

• 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®

Ultrasonic flowmeter for liquid process applications

• Accurate 3-path meter: large dynamic range, maintenance-free, no pressure loss

• Cryogenic (-200°C/-328°F) and HT (+250°C/+482°F) versions; viscosities up to over 1000 cSt

• Flange: DN25…3000 / 1…120", max. PN200 / ASME Cl 1500; also weld-ends

• 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP

Vortex flowmeter for utility applications and energy management systems

• For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F)

• Integrated P+T measurement: direct output of mass, nominal flow, energy, gross/net heat

• Flange: DN15…300 / ½…12"; wafer version: max. DN100 / 4"

• 2-wire, 4…20 mA, HART®, FF, Profibus-PA